Measuring

Sort By:

Rp 46.000.000
Rp 35.000.000Rp 35.000.000

Chlorophyl Meter CM-B

Product Description

 Portable Chlorophyll Meter

Features

Chlorophyll Meter is able to measure chlorophyll content of plants and leaf temperature. Chlorophyll content and leaf nitrogen content have a very close relationship. Thus, chlorophyll content can reflect plants demand for nitro. Using the instrument can do go to put nitrogen fertilizer reasonably, improve utilization of nitrogen and protect environment.

1. Enter the name of the plant, the standard nitrogen content and utilization, the standard fertilizer can be directly calculated.

2. Chlorophyll, leaf temperature are displayed on same screen at the same time, and can be stored at the same time.

3. USB interface can be connected to the computer to export the measured data, to facilitate the management and analysis of plant nutrients. (Only for CM-B)

Specification

Model

CM-A

CM-B

Measuring area

2mm*2mm

Measuring Mode

2-wavelength concentration difference of optical methods

Sensors

Silicon semiconductor photodiode

Display Mode

Measuring value: 3 digits liquid crystal display;

Measuring times: 2 digits liquid crystal display;

Min measuring interval

< 3s

Measuring Range

0.0-99.9 SPAD, -10~99.9°C

Accuracy

±3.0 SPAD; ±0.5°C

Repeat

±0.3SPAD, ±0.2°C

Power Supply

4.2V -2000Mah rechargeable Li battery

Memory Capacity

30KB, automatically calculate and show the average

Packing Size(W*D*H)

390*230*220mm

Gross Weight

1.8kg

Rp 48.000.000
Rp 43.000.000Rp 43.000.000

Chlorophyl Meter TYS-A

Product description
 
Chlorophyll Meter is able to measure chlorophyll content of plants and leaf temperature. Chlorophyll
content and leaf nitrogen content have a very close relationship. Thus, chlorophyll content can reflect
plants demand for nitro. Using the instrument can do go to put nitrogen fertilizer reasonably, improve
utilization of nitrogen and protect environment.
 
Technical parameters
 
Measuring area: 2mm*2mm
Measuring mode: 2‐wavelength concentration difference of optical methods
Sensors: Silicon semiconductor photodiode
Display mode: measuring value: 3 digits liquid crystal display
            Measuring times: 2 digits liquid crystal display
Min measuring interval :< 3s
Measuring Range: 0.0‐99.9 SPAD, ‐10~99.9°C
Accuracy: ±1.0 SPAD; ±0.5°C
Repeat: ±0.3SPAD, ±0.2°C
Operating temperature: ‐10‐50°C  
Power: 4.2V ‐2000Mah rechargeable Li battery.
Memory capacity: 30KB, automatically calculate and show the average.  
Weight: 200 grams
 
Related Products
 
Plant Nutrient Analyzer/Plant Photosynthesis Meter /Leaf Area Meter/Plant Respiration Meter

Rp 160.000.000
Rp 140.000.000Rp 140.000.000

Egg Multi Tester EMT-7300

Measurement Specifications:

1. Egg Weight            : 30gr - 150gr ± 0.1gr

2. Albumen Height      : 2.6mm - 15.0mm ± 0.2mm

3. Yolk Color               : 1.0 - 15.0m (based on robotmation yolk color chart) 

4. Haugh Unit             : 0 - 130

5. Rank                      : AA : 72 or more / A : 71 - 60 / B : 59 - 31 / C:30 or less

6. Dimension               : 350 x 350 x 190 mm

7. Power Consumption : Less than 60 W

8. Temperature Range : 20 - 35°C

9. Humidity Range       : 35 - 85% (No Condensation) 

10. Power Supply        : AC100 - 240V / 50 - 60 Hz

11. Weight                 : Approx 14 kg 

Rp 1.234
Rp 123Rp 123

egg shell thickness gauge

This egg shell thickness gauge is an ultrasonic gauge which measures the egg shell at a high speed and accuracy.
Just by touching the probe to the egg shell surface, the egg shell thickness is displayed digitally.
The measurement can be performed easily and quickly with this device.
 
Measurement Specifications
1. Measurement range: 0.10mm~30.00mm
2. Accuracy: ±0.01mm
3. Frequency: 0.5~20MHz (standard)
Specifications
1. Power source: 100V AC 50/60Hz
2. Battery: 6V DC  3.0AH lead-acid battery incorporated
3. Outer dimension: W190×H50×D270mm
4. Weight: 1.9kg
Option
Data print circuit and printer
Rp 32.000.000
Rp 25.000.000Rp 25.000.000

HAD-YL6 Chlorophyll meter

HAD-Y L6 Chlorophyll meter/plant chlorophyll meter

Introduction

Green element tester can real-time measuring plant chlorophyll relative content or the "green degree" of plant leaf chlorophyll content is an indicator of the status of the plant itself, grew well in the plant's leaves contain more chlorophyll, chlorophyll content and nitrogen content in the leaves have a close relationship, therefore the chlorophyll measurements can also explain the real demand of nitrocellulose plant, through this kind of instrument is beneficial to reasonable applying nitrogen fertilizer, improve the utilization rate of nitrogen, and can protect the environment (prevents excessive nitrogen fertilizer and make the environment especially the pollution of water source)

Feature

Chlorophyll meter by measuring the leaf in two wavelength range of light transmittance relative quantity to determine the current leaf chlorophyll, which is in the chlorophyll choose two wavelength region absorb certain wavelengths of light, measured value is calculated according to the amount of transmitted light blade.

Technical parameters:

Functional features

Function characteristics measuring time fast
The LCD shows chlorophyll value directly
Small and portable instrument, can carry to the field measurement

Measure Sample

Measuring the sample all kinds of plant leaves

The measurement area

diameter:10mm*10mm

Measuring way

2 wavelength optical concentration difference method

Sensor

silicon semiconductor photoelectric diode

Display measurements

3 digit LCD display

Measurement times

The smallest interval of measurement is less than 2 seconds

measurement range

0.0-99.9 SPAD

Accuracy

+ / - 1.0 SPAD (at room temperature, SPAD value ranges from 0 to 50)

Repeatability

within + / - 0.2 SPAD unit (SPAD value ranges from 0 to 50)

Reproducibility

within + / - 0.5 SPAD unit (SPAD value ranges from 0 to 50)

Operating temperature

0~50℃

Storage temperature

-20~~55℃

Data storage

SD card storage: 2 g

Electrical source

rechargeable lithium batteries

Standby time to charge

normally available for seven days

Rp 3.700.000
Rp 3.000.000Rp 3.000.000

Yolk Color Chart

People have been interested in the color of the yolk of a hen's egg in the distribution process as an element that determines the commercial value of the egg. Therefore, the color of a yolk has been divided into 15 stages to distinguish the color density and provided a yardstick.

The Roche Color Fan has been widely used in the world in the past. However, Roche Ltd. in Switzerland, which produced the fan, stopped production ten years ago after making the year 1993 version. These fans scattered around the world were lost gradually, and we have heard many complains. Therefore, we have decided to make such fan in Japan.

To avoid confusion of the color standard that has been used so far, we have sufficiently examined the sample colors, starting production of Yolk Color Chart(2004). Please make use of the chart.

Our chart, when used as novelties or giveaways for promotion of hen's eggs, will help you improved your performance.

Rp 1.234
Rp 123Rp 123

CHROMA-2 Pocket Chroma Meter

CHROMA-2 Pocket Chroma Meter for LED light test Chroma Coordinates and CCT CRI lux lumen

CHROMA-2 Portable Colorimeter is developed based on TOSHIBA TCD1304DG linear array CCD detector. It makes traditional laboratory instrument available for the production on-line quality acceptance, thus greatly improved the efficiency of fluorescent lamp, CFL, LED.

Measurements:

Chroma Coordinates (x, y, u, v, duv), CCT (Correlated Color Temperature), CRI (Color Rendering Index), Dominant Wave, Peak Wave, Flux RGB Ratio, Half Width, Purity, Spectrum diagram. Illuminance test (lx) or flux test (lumen) with the integrating sphere.

Specifications:

• LCD Display and can measure all of the chroma color parameters and illuminance directly
• It can test flux additional with the integrating sphere
• Rang of wavelength: 380nm~780nm( visible sight)
• Accuracy of wavelength: ±0.5nm; repeatability: ±0.2nm
• Accuracy of chromaticity coordinate: ±0.003; resolution: 0.0001
• Correlated Color Temperature range: 1500~25000K (±3%); resolution: 1K
• Power supply: 3.7V Li-Battery
• Dimension: (Width×Height×Depth) 90mm×180mm×48mm; Weight: approximate 1kg
• Communicate the PC via RS-232, the English software can be run in WinXP or Win7

Rp 185.000.000
Rp 170.000.000Rp 170.000.000

CR-400 Chroma Meter

Compatible with the CR-300, the handheld CR-400 chroma meter is its improved successor. Upgrading is easy for current CR-300 owners because existing data can be used.

Able to store up to 1,000 measurements internally, or 2,000 when the data processor is connected, the CR-400 chroma meter is also portable and easy-to-use, plus it has the ability to measure different types of products and multiple kinds of surfaces in various applications.

The lightweight, compact data processor can be operated by battery or can be connected by AC adapter, and with its ability to print results on-site, labeling is easy. Featuring a user index function, the CR-400 series allows customers to configure evaluation and color calculation formulas as desired. This feature is extremely useful when customized or industry-specific formulas are used instead of the versatile color system and standard evaluation formula (L*a*b*).

The CR-400 chroma meter’s LCD screen is capable of displaying pass/fail information and color-difference graphs, and can be set in any of six different languages, including English, Spanish, Italian, Japanese, French and German. Type user comments into the results or, by using the data processor, customers can determine channel names. A variety of accessories are available to accommodate various target types such as powders, liquids, and pastes.

The CR-400 chroma meter is compatible with SpectraMagic NX software and is easy-to-use. Multiple views of data results can be viewed and edited. By associating target data of the primary target with two or more secondary targets, sophisticated QC applications are allowed, such as checking for color difference.

Data interpretation is easy. Simply drag-and-drop information into the software then print. Display information on a variety of graphs, or utilize preconfigured templates, and view instrument information at a glance in the available status window. Thanks to maximum compatibility, data compiled with older software can be transferred to the newest updated software so nothing is lost. Export information into Excel if needed, and get additional information on the spot utilizing the Navigation Function and Color Tutorial included with the software.

Rp 85.000.000
Rp 68.000.000Rp 68.000.000

YT-ACM full automatic chroma meter

Brief introduction:

YT - ACM automatic chroma meter is developed by our company in the industry's first fully automatic determination of a key all colors and white degree of technical parameters of new instruments, are widely used in papermaking, printing, textile printing and dyeing, ceramics, enamel, building materials, chemical industry, food, salt, etc, used to determine the object of white, yellow, color and color difference, also can be used to measure the opacity of paper, transparency, light scattering coefficient and absorption coefficient of light and ink absorption values.

Features:

1. The main new design, using the latest technology, the CPU USES the 32-bit ARM processor, improve the processing speed, more accurate fast calculation data

2. TFT true color color LCD touch screen, the operation more humanized, new users also can be used in a short period of time to master methods

3. Increase the data cache, more convenient user backup, consult, historical data

4. Electromechanical integration design, instead of the artificial turn the handwheel trival test process, a key to achieve real determination, efficient, accurate test scheme

5. Simulation D65 lighting lighting, using CIE1964 supplement and CIE1976 chromaticity system (L * a * b * color space color difference formula

6. Adopt the d/o lighting observation geometry, diffuse ball diameter of 150 mm, measuring hole

7. A light absorber, eliminate the influence of sample mirror reflected light

8. Increase the printer and imported thermal printer machine, do not need to use ink and ribbon, no noise, fast printing work

9. Reference sample can be physical, can also be used for the data

10. Memory can store up to ten reference sample information

11. Has the memory function, even if the shutdown of a long term, the zero memory, calibration, standard sample, and the value of the reference samples and other useful information are not lost

12. Equipped with a standard RS232 interface, can cooperate to communicate with the computer software

Technical parameters

Repeatability: sigma (Y10) < 0.05, sigma (X10, Y10) < 0.001

Accuracy: delta Y10 < 1.0, delta x10 (delta Y10) < 0.005

Specular reflection error: 0.1 or less

Sample size: test plane not less than 30 mm Φ, sample thickness is no more than 40 mm

Power supply: ac 185 ~ 264 v, 50 hz, 0.3 A

Working conditions: temperature 0 ~ 40 , relative humidity less than 85%

Shape size: 380 mm (length) x 260 mm (width) x 390 mm (high)

Instrument weight: 12.0 kg

Rp 1.450.000
Rp 1.200.000Rp 1.200.000

Pork Detection Kit 10Test

Rp 2.500.000
Rp 2.200.000Rp 2.200.000

Pork Detection Kit 20Test

Rp 2.950.000
Rp 2.600.000Rp 2.600.000

Lux Meter SANWA LX2

LUX METERS
Type : LX2
Merk : SANWA

Easy to use lux meter

Features :

> Small stick shape sensor probe(sensor diameter φ9mm)
> 3999 count with analog bar graph
> Silicon photodiode
> Measuring range 0.1lx~399.9klx
> Data hold
> Auto power save(30min.)
> Cord length 900nm

Specifications :

> optical Sensor : si photodiode with approximited relative luminios effeciecy (9mm)
> Display : Numeric : 3999 full scale , Bargrah:42-segment
> Sampling rate :
Approx. 2 times/sec for numeral display
Approx.20 times/sec. for bar graph

Rp 2.650.000
Rp 2.500.000Rp 2.500.000

SANWA PC700


Rp 650.000
Rp 600.000Rp 600.000

SANWA YX360TRF

■Drop shock proof meter
■ Null (zero center) meter ±5 / ±25 in DCV
■ High resistance up to 200MΩ with low voltage
■ Protective body cover
■ Capacitance, dB, Li measurement
Bandwidth : 30〜100kHz (AC10V)

hFE probe : HFE-6T
Clip adapter : CL-14, CL-15a, CL-DG3a, TL-9IC
High voltage probe : HV-10T

Rp 3.000.000
Rp 2.850.000Rp 2.850.000

Tachometer SANWA SE 300

Spesifikasi Sanwa SE300 Non-Contact Tachometer

Sanwa SE300 Tachometer

Basic Features

Designed for ease of holding to enable stable measurement
Max/Min value hold
Auto power off (2min.) (cancelable)
Fixed installation possible using a commercially available camera tripod
Contact measurement (optional ENC-3)

Optional Accessories

Reflective sticker (50stickersX2sheets) : SE-T3

Contact measurement attachment : ENC-3

(contact adapter, contact marker and rim speed ring)

contact marker : SE-A30

Rim speed ring : SE-A31

Rp 7.500.000
Rp 5.180.000Rp 5.180.000

GC210 Carbon Monoxide

Specifications

Model

GC210

Detect gas

Single gas (Combustible gas, toxic gas, oxygen)

Sensor

Replaceable temperature-compensated catalytic combustion sensor or electrochemical sensor or infrared sensor

Accuracy

3% F.S

Response time

T90<30s

Operating temperature

-30 ~ + 50 degree

Humidity

<95% RH non-condensing

Voltage

DC3.6V Li-ion battery 1200mAh

Charging time

4h~6h

IP grade

IP66

Explosive grade

Ex ia IIC T4

Weight

About 120g (including battery)

Dimension

102 mm×56mm×26mm

Duration of operation

Flammable gas < 8 (non-stopped); toxic gas < 300h (non-stopped)

Indication

Large STN  LCD indicates real time and system state

Alarm indication

Wide-angled light emitting diode, 85db buzz (the frequency of buzz depends the density), vibrating

Fault indication

Indications of zero point drift and sensor failure

Handheld Ultrasonic Flowmeter TUF-2000H

[ Feature ]

High Accuracy measuring

Linearity: better than 0.5%, Repeatability: better than 0.2%, Accuracy: better than ±1%

Small size, Light weight

Dimensions: 200×93×33mm; Weight:390g

Non-intrusive measuring

Non-intrusive, clamp-on transducer, no pressure drop, no pipe disturbance.

Wide measuring range

Several types transducer for selection, measuring pipe size from DN15mm to DN6000mm

Large LCD display

Display instantaneous flow, accumulated flow (positive, negative and net), velocity, working status etc.

Built-in data logger

Built-in 24K data logger, store over 2000 lines measuring data 

[ Main Feature ]

Items

Performance and Parameter

Main Unit

Principle

transit-time ultrasonic flowmeter

Accuracy

Accuracy :over 1%-2%; Repeatability: over 0.2%

Display

4 line x 16 character LCD with backlight

Dimension

200*93*33cm:   390g

Operation

Support 16 key light touch keyboard and the Simulation keyboard software

Data interface

Insulate RS232 serial interface, upgrade the flew meter software by computer, 

support the MODBUS, etc. 

Signal Output

1 way OCT output

Special Cable

Twisted-pair cable, ;Select the RS232 communication.;

Generally, the standard is 5m*2, optional 10m*2 

Pipe Condition

Pipe Material

Steel, Stainless steel, Cast iron, Copper, Cement pipe, PVC, Aluminum, Glass

 steel product, liner is allowed.

Pipe Diameter

DN 15---6000mm

Straight length pipe

Transducer installation should be satisfied: upstream10D, downstream 5D, 

30D from the pump.

Measuring Medium

Type of Liquid

Water ; Ultra-pure liquids; Solvents and other liquids 

Temperature

Standard Transducer: -30--90℃; High-temperature transducer: -40--160℃

Turbidity

under 10000ppm and less bubble 

Flow rate

0--±10m/s

Flow Direction

Measuring two (plus-minis) direction of flow rate 

Working Environment

Temperature

Main Unit: -20--60℃

Flow transducer: -40--160℃;  

Temperature transducer: according to the customer’s demands.

Humidity

Main Unit: 85% RH

Power Supply

AC  110V-240V  

Rp 12.000.000
Rp 9.800.000Rp 9.800.000

Ultrasonic Flowmeter TUF-2000SW

Features:

Working Environment

  Main Unit Transducer
Protection Level IP65 IP68
Humidity

≤85%RH

Temperature -20~60 -30~160

   

 

 

Basic Parameters

Accuracy

≤1%

Velocity range 0~±10m/s, Bi-directional measurement
Pipe size DN32~DN6000mm
Temperature -30~160
Type of liquid Single liquid can transmit ultrasound, such as water, sea water, sewage, oil, alcohol, etc.
Pipe material Steel, stainless steel, cast iron, copper, PVC, aluminmum, glass steel, etc. Liner is allowed.
Signal output

1 way 4-20mA output

1 way OCT pulse output

1 way Relay output

Signal input 3 way 4-20mA input, achieve to heat measurement by connecting PT100 platinum resistor.
Interface RS485, support MODBUS
Data storage SD card regularly store the pre-set results(optional)
Power supply DC8~36V or AC85~264V
Rp 1.234
Rp 123Rp 123

Ultrasonic heat meter TUF-2000F

Working Environment

  Main Unit Transducer
Protection Level IP65 IP68
Temperature -20~60 -30~160

Basic Parameters

 

Accuracy

≤1%

Velocity range 0~±10m/s, Bi-directional measurement
Pipe size DN32~DN6000mm
Temperature -30~160
Type of liquid Single liquid can transmit ultrasound, such as water, sea water, sewage, oil, alcohol, etc.
Pipe material Steel, stainless steel, cast iron, copper, PVC, aluminmum, glass steel, etc. Liner is allowed.
Signal output

1 way 4-20mA output

1 way OCT pulse output

1 way Relay output

Signal input 3 way 4-20mA input, achieve to heat measurement by connecting PT100 platinum resistor.
Interface RS485, support MODBUS
Data storage SD card regularly store the pre-set results(optional)
Power supply

DC8~36V or AC10~30V

AC85~264V, waterproof power adapter.

Rp 12.000.000
Rp 10.000.000Rp 10.000.000

Ultrasonic Flowmeter TUF-2000P

product

The current position : product display

Portable Ultrasonic Flowmeter

 
Model:TUF-2000P
 
 
  • Illustrations
  • Detailed Parameters

[ Feature ]

High Accuracy measuring

Linearity: better than 0.5%, Repeatability: better than 0.2%, Accuracy: better than ±1%

Non-intrusive measuring

Non-intrusive, clamp-on transducer, no pressure drop, no pipe disturbance.

Wide measuring range

Several types transducer for selection, measuring pipe size from DN15mm to DN6000mm

Chinese & English menu

Chinese & English display, easy to operate.

Built-in printer

Built-in mini thermal printer with instant and timing print function

Built-in data logger

Uplink over 20 measuring data to computer or SD card, convenient for the data processing and applications

Multi-signal input &output

Multiple signal interface easy for input and output signals

[ Main Feature ] 

Items

Specifications

Main unit

2 line x 20 character LCD with backlight

Working temperature: -25--60

Mini thermal printer with 24 line character output

4x4+2 pushbutton keypad

RS-485 interface for networking

Signal input & output

1 channel 4-20mA output

1channel OCT output

1channel relay output

3 channel 4-20mA input

Medium

Water (hot water, chilled water, city water, sea water, waste water, etc.);  

Sewage with small particle content; 

Oil (crude oil, lubricating oil, diesel oil, fuel oil, etc.);  Chemicals (alcohol, acids, etc.); 

Plant effluent; Beverage, 

liquid food; Ultra-pure liquids; Solvents and other liquids

Flow rate Range

0~±10m/s

Accuracy

Better than ±1%

Battery

Built-in rechargeable Ni-MH rechargeable battery, provide over 20 hours of continuous operation 

Power Consumption

1.5W

Power supply

Built-in rechargeable Ni-MH battery (for 20 hours operation) or AC 220V

Weight & Dimensions

2.5kg ;  225*180*67mm: 

Remarks

With a high strength carrying case suitable for normal and harsh environment

Rp 100.000.000
Rp 85.000.000Rp 85.000.000

Cement Screw Conveyor

Harga yang tertera adalah estimasi,dimohon menghubungi CS

Description of High efficiency silo cement screw conveyor:

 A screw conveyor or auger conveyor is a mechanism that uses a rotating helical screw blade usually within a tube, to move liquid or granular materials. They are used in many bulk handling industries. Screw conveyors in modern industry are often used horizontally or at a slight incline as an efficient way to move semi-solid materials, including food waste, wood chips, aggregates, cereal grains, animal feed, and many others.

The screw feeder conveyor consist of a trough or tube containing either a spiral blade coiled around a shaft, driven at one end and held at the other, or a "shaft-less spiral", driven at one end and free at the other. The rate of volume transfer is proportional to the rotation rate of the shaft. In industrial control applications the device is often used as a variable rate feeder by varying the rotation rate of the shaft to deliver a measured rate or quantity of material into a process.

Screw feeder conveyors can be operated with the flow of material inclined upward. When space allows, this is a very economical method of elevating and conveying. As the angle of inclination increases, the capacity of a given unit rapidly decreases.

Main feature of the screw conveyor:

1. The machine is especially suitable for conveying all kinds of powdery material, also can be used for conveying all kinds of granular or flake materials.
2. Using unique designed stainless steel screw-shaped blade.
3. High conveying capacity, safe and reliable operation, easy to disassemble and clean.
4. Good adaptability and long service life.
5. Good sealing quality and rigidity.

Application:

1. Food Processing Pharmaceutical
2. Powder and energy Petrochemical
3. Chemicals Mining and minerals
4. Feed processing Plastic

Rp 34.000.000
Rp 30.000.000Rp 30.000.000

Grading soil test sieve

Harga hanya estimasi,untuk detailnya silahkan hubungi CS

Product Description

China grading analysis 200mm soil test sieve is an effective method for particle size measurement. It is commonly used for Quality Control in almost all industries such as chemicals, mining and metallurgy, food, cosmetics, pharmaceuticals and any laboratory involved in particle size analysis. The displayed standard test sieve is a good helper for particle size analysis.

Technical Parameters
Layer
1~8 layers
Diameter
200 mm
Material
Stainless steel-
Noise
Lower than 50db
Feed capacity(once)
200g
Granularity
0.038~30 mm
Power
0.12KW
Overall dimension
360*300*736 mm
Rp 40.008.000
Rp 42.000.000Rp 42.000.000

Mini Sifter Machine

Technical parameters:

Model

Power(KW)

Effective diameter

Dimensions(mm)

Layer

 

HY-400

-1S

 

0.18

 

360 mm

580×580×560

1

-2S

580×580×670

2

-3S

580×580×780

3

 

HY-600

-1S

 

0.25-0.55

 

560 mm

800×800×750

1

-2S

800×800×890

2

-3S

800×800×1030

3

 

HY-800

 

-1S

 

0.55-0.75

 

760 mm

900×900×750

1

-2S

900×900×890

2

-3S

900×900×1030

3

 

HY-1000

-1S

 

0.75-1.5

 

930 mm

1160×1160×810

1

-2S

1160×1160×950

2

-3S

1160×1160×1090

3

 

HY-1200

-1S

 

1.10-1.75

 

1130 mm

1360×1360×885

1

-2S

1360×1360×1050

2

-3S

1360×1360×1275

3

 

HY-1500

-1S

 

1.50-2.20

 

1430 mm

1850×1850×990

1

-2S

1850×1850×1185

2

-3S

1850×1850×1380

3

 

HY-1800

-1S

 

2.20-3.0

 

1730 mm

2200×2200×1050

1

-2S

2200×2200×1250

2

-3S

2200×2200×1450

3

 

Rp 35.000.000
Rp 30.000.000Rp 30.000.000

Precision Sieve Testing

Product Description

200mm high precision sieve testing instrument is an effective method for particle size measurement. It is commonly used for Quality Control in almost all industries such as chemicals, mining and metallurgy, food, cosmetics, pharmaceuticals and any laboratory involved in particle size analysis. The displayed standard test sieve is a good helper for particle size analysis.

Technical Parameters
Layer
1~8 layers
Diameter
200 mm
Material
Stainless steel-
Noise
Lower than 50db
Feed capacity(once)
200g
Granularity
0.038~30 mm
Power
0.12KW
Overall dimension
360*300*736 mm
Rp 85.000.000
Rp 60.000.000Rp 60.000.000

Ultrasonic Vibrating Screen

Harga yang tertera adalah estimasi bisa turun atau naik ,dimohon menghubungi CS

Main features:
1.In achieving high precision and high mesh screening at the same time, control of a narrow size range.
2.Single or multilayer together screening, with a smart ultrasonic generator at the same time make
  use of one transducers.
3.Ensure that the processing characteristics of the material unchanged.
4.Real solution to strong absorption, easy to join, high static, highprecision, high density, light weight
  and other screening problems.
5.Thoroughly screen self-cleaning function: greater than 500 mesh sieve, mesh-free jam, no attenuation of screening efficiency.
6.1-70% can increase screening accuracy, output can be increased 0.5-10 times.

Technical parameter:
Model
Effective sieving area (m² )
Screen size
Layer
Power(kw)
CSB-600
0.2461
 
 
100-500 mesh
 
 
1-2 layers
0.25
CSB-800
0.4534
0.55
CSB-1000
0.6789
1.1
CSB-1200
1.0023
1.1
Rp 870.000
Rp 750.000Rp 750.000

BOGOROV CHAMBER

Bogorov Chamber ini adalah peralatan untuk menghitungjumlah
zooplankton mikro krustasea & benthos. Pada volume sampel yang cukup
besar yakni 6 ml.
Terbuat dari bahan Plexiglass dengan ketebalan 10 mm.Bentuk dan
konfigurasi, terukir alur lebar 5 ml dan panjang keseluruhan 350 mm.
Alat ini memiliki ukuran 3,5 "x 4,5" , sehingga sesuai untuk diletakkan di
bawah mikroskope.
Kemasan : Berisi 1 buah Bogorov Chamber Kapasitas 6 ml, dan 2 buah
Pipet 3 ml

Rp 4.000.000
Rp 3.600.000Rp 3.600.000

Grab Sampler 250ml

Alat ini cocok digunakan untuk berbagai keperluan seperti ; air limbah (baik di sungai maupun pada
kolam limbah), danau, tangki (air atau minyak), lubang sumur pantau (khusus model : APAL-GW01),
lubang saluran air dan tempat-tempat yang sulit dijangkau lainnya.
Alat  pengambil  contoh  air  ini  terdiri  dari  botol  gelas  (Borosilicate)  dan  stainless  steel  yang  ujung
atasnya  dapat  di  buka  tutup  dan  terikat  tali  keatas sedangkan  ujung  bawah  tertutup  dan  dilengkapi
pemberat di bawah.
Metode ini sesuai dengan SNI 6989.58:2008
Bahan    : Stainless steel
Botol Penampung  : Borosilicate Glass
Botol Kapasitas  : (APAL-GW01) 250 ml ; Tinggi : 300 mm, Diameter : 92 mm
   : (APAL-GW02) 1000 ml ; Tinggi : 400 mm, Diameter : 140 mm
Tali Utama   : PE 5 mm Panjang 20 meter (putih)
Tali Kedua   : PE 3 mm Panjang 20 meter (merah)
Material   : semua material terbuat dari bahan anti karat Stainless Steel dan Teflon
Botol Penampungan  : Dapat disterilisasi dengan Autoclave, sehingga dapat digunakan
untuk tujuan sampling Bacterial

Rp 2.000.000
Rp 1.500.000Rp 1.500.000

H2S Strip 50 Test

Apakah H2S Test Strip Kit ?
H2S Test Strip Kit adalah alat sederhana untuk mengetahui kandungan H2S sebagai indicator Bakteri
yang berguna dalam pemeriksaan bakteriologis pada air minum.
Metode Kerja Kertas H2S
Metode Hydrogen Sulphide ini adalah suatu metode pengujian untuk mengetahui kualitas air
minum dan didasarkan pada deteksi hidrogen sulfida sebagai hasil metabolisme bakteri patogen.
Seperti Coliform dan E-Coli serta beberapa bakteri enterik seperti Salmonella, Proteus, Citrobacter
dan beberapa strain lebsiella, juga menghasilkan hidrogen sulfida.
Kertas strip Steril yang telah berikan reagent disimpan dalam botol kaca steril. Sampel air diisi dalam
botol dan disimpan selama 24 sampai 48 jam pada suhu kamar (25-37 C).
Jika terdapat bakteri dalam sampel, maka gas hidrogen sulfida yang di hasilkan oleh bakteri tersebut
akan membuat kertas strip berwarna hitam. 

Rp 13.500.000
Rp 11.000.000Rp 11.000.000

OPACITY METER

OPACITY METER / SMOKE INDICATOR
The methods in measuring the density of  smoke in brief are:
1. With eyesight
(1)  To measure the density of smoke in accordance with
uniformed diagram.
(2)  To measure the alteration of ray from source of light
through the gas exhausted.
2. Physical way
To weight the solid substances in a certain volume of exhausted gas. And in the medium or
smaller plants, measurement of the density of smokerelies upon the Ringelman way, which is
the standard in regulating the smoke in many of thecountries.
CHARACTERISTIC
The smoke indicator for practical application of Ringelman diagram, and is indispensable for
minimizing contamination of the air and saving fuel.
METHOD
To overcome the many disadvantages in conventional Ringelman way, the diagram is
imprinted on the special film inside for practical measuring of the density of smoke observed
through.
PRACTICAL.
The measuring distance of 16 m. which is required in conventional way, is not necessary in
"THE SCOPE", as the diagram is inside of it.
SPECIFICATIONS:
FS-102
Plant use, both portable and stationary  way, with legs. 2 steps extensible, include
Abney level Tripode and cleanning lens set.
diameter ............................. 40 mm.
length overall .................. 640 mm.

Rp 1.200.000
Rp 1.000.000Rp 1.000.000

Ovitrap Mosquito Trap

Ovitrap adalah perangkat terdiri dari sebuah bejanaair yang dilengkapi tabung dengan screen untuk
mencegah anakan nyamuk keluar, berfungsi sebagai perangkap larva nyamuk dan anakan nyamuk
Perangkat  ini  digunakan  untuk  mengontrol  populasi  nyamuk  Aedes  dan  nyamuk  lainnya.  Hal  ini
dapat  memantau,  mengendalikan  dan  mendeteksi  populasi  nyamuk  Aedes  sehingga  bertindak
sebagai sinyal peringatan dini untuk mendahului wabah demam berdarah yang akan datang.
Prinsip  kerja ovitrap Telah  banyak  digunakan  di  negara-negara  seperti  Singapura,  Amerika  Serikat,
dan Hong Kong sejak tahun 1970-an
Ukuran : diameter 184 mm x 122 mm, Kapasitas : 2.2 lt
Ideal digunakan di ;
Sekolah,  Pusat  pengendalian  dan  pencegahan  penyakit,  rumah  sakit,  bangunan  komersial,  kamar
mandi, dapur basah, taman, kolam renang situs dan lain-lain.
PRINSIP KERJA
Ovitrap  ketika  ditambahkan  dengan  air  akan  menarik  nyamuk  betina  untuk  bertelur.  Ketika  telur
menetas dan berkembang menjadi dewasa, mereka tidakdapat terbang keluar dari perangkat dan
mati  dalam  perangkap.  Ekstensif  menggunakan  ovitrap dalam  sebuah  komunitas  dapat  digunakan
dalam pengendalian populasi Aedes dan efektif mengurangi populasi nyamuk Aedes di daerah itu.
REKOMENDASI
Untuk mendapatkan hasil yang maksimal dapat ditambahkan cuka buah / ragi dan sedikit gula.
PERAWATAN
Setelah larvae nyamuk dan serangga yang terperangkap telah cukup padat, sesekali perlu
dibersihkan untuk ovitrap, setidaknya dua minggu sekali.
Gunakan air untuk mencuci, kemudian simpani tempat yang kering. 

Rp 1.500.000
Rp 1.100.000Rp 1.100.000

Tabung Pengukur Kekeruhan

Tabung Pengukur Kekeruhan juga dapat digunakan untuk mengukur kekeruhan air pada Sumursumur yang biasa digunakan masyarakat.
Spesifikasi alat ;
▪ Bahan Tabung  : Transparan Acrylic
▪ Secchi disc  : Plastic Teflon dengan pemberat
▪ Dia secchi disc  : 4,5 cm
▪ Ukuran Tabung  : 70 cm (Long) x 5 cm (Dia)
Cara penggunaan
•  Masukkan air sampel yang akan di ukur ke dalam tabung sampai hampir penuh atau +/- 5 cm
mendekati bibir atas tabung
•  Selama tabung berisi air pegang dengan kuat dan tegak lurus agar tabung tidak jatuh
•  Diamkan dulu air yang ada di dalam tabung kurang lebih 5 menit, untuk pengkondisian.
•  Tarik meteran sampai memanjang 1 meter lalu masukkan secchi disc ke dalam tabung

Rp 1.500.000
Rp 1.300.000Rp 1.300.000

Vektor  Kit  adalah  serangkaian  alat  untuk  pemantauan dan  identifikasi  jentik  nyamuk  dan
nyamuk dewasa sebagai bagian dari pencegahan dini terhadap penyakit menular bersumber
dari vektor nyamuk.
Alat ini terdiri dari ;
1.  Aspirator 1 buah
2.  Cup include screen 10 buah
3.  Dipper 500 ml 1 buah
4.  Senter LED with Battery charge 1 buah
5.  Botol Larvae 10 buah
6.  Lensa Loupe with LED 1 buah
7.  Ovitrap 2 buah