Water Quality

Sort By:

Free & Total Chlorine 6742

Free & Total Chlorine Waterproof Pen Tester

Special Features

  • Fast response, reliable & accurate measurements.
  • Large LCD display 21 x 18mm for easy reading.
  • Impact resistant ABS case by waterproof designed IP 57 rated.
  • 1 or 2 points (pH only) manual calibration via screw trim pot.
  • The electrode module are changeable for replacement by user.

Applications

  • Swimming pool & Spa
  • Agriculture
  • Fish Farming
  • Food Industry
  • Waste Water
  • Plating industry
  • Cooling Towers
  • Chemical Industry
  • Floriculture
  • Pharmaceutical & Medical

Electrical Specifications

Range

  • Model 6011 pH Type : 0 ~ 14.0
  • Model 6011A pH Type : 0 ~ 14.00
  • Model 6021 Conductivity Type : 0~19990S
  • Model 6022 Conductivity Type : 0~1999S
  • Model 6031 TDS Type : 0~19990 ppm
  • Model 6032 TDS Type : 0~1999 ppm
  • Model 6032 EC Type : 0~19.99 EC

Accuracy

  • Model 6011 pH Type : ± 0.1+1 digit
  • Model 6011A pH Type : ± 0.1+1 digit
  • Model 6021 Conductivity Type : ± 1% FS
  • Model 6022 Conductivity Type : ± 1% FS
  • Model 6031 TDS Type : ± 1% FS
  • Model 6032 TDS Type : ± 1% FS
  • Model 6032 EC Type : ± 1% FS

Resolution

  • Model 6011 pH Type : 0.1 pH
  • Model 6011A pH Type : 0.01 pH
  • Model 6021 Conductivity Type : 10 S/cm
  • Model 6022 Conductivity Type : 1 S/cm
  • Model 6031 TDS Type : 10 ppm
  • Model 6032 TDS Type : 1 ppm
  • Model 6061 EC Type : 0.01 EC

ATC*

  • Model 6011 pH Type : No
  • Model 6011A pH Type : No
  • Model 6021 Conductivity Type : Yes
  • Model 6022 Conductivity Type : Yes
  • Model 6031 TDS Type : Yes
  • Model 6032 TDS Type : Yes
  • Model 6061 EC Type : Yes
  • *Automatic Temperature Compensation

MODEL 6741 / 6742

Applications

  • Widely used for testing water quality in swimming pools, tanks etc.

Special Features

  • Microprocessor based for fast and accurate measurement
  • Large LCD display 21 x 18mm for convenient reading.
  • Waterproof designed IP 57 rated. It floats on water.
  • The sensor module are changeable for replacement by user
  • Low battery alarm and auto shut off after 2 minutes of non use.

Electrical Specifications

  • Range FCL : 0-2.50 ppm (mg/L)
  • TCL : 0-3.0 ppm (mg/L) (Model 6742)
  • Resolution : 0.01ppm
  • Accuracy : ± 0.05 ppm at < 1 ppm; ± 0.5% FS at > 1 ppm
Rp 2.000.000
Rp 1.500.000

Free Chlorine 6741

Features:
1 Microprocessor based for fast and accurate measurements.
2 EPA approved DPD method.
3 Large LCD display 21 x 18 mm for reading convenient.
4 Waterproof designed IP 57 rated. It floats on water.
5 The sensor module are changeable for replacement by user.
6 Low battery alarm and auto shut off after 2 minutes of non use.

Range FCL  : 0-2.50ppm(mg/L)
Resolution : 0.01ppm
Accuracy  : 0.05ppm at<1ppm;+0.5% FS at>1ppm

Rp 3.800.000
Rp 3.350.000

Fructose Digital Refractometer MA872

The MA872 is an optical instrument that employs the measurement of refractive index to determine the % Fructose in aqueous solutions. The method is both simple and quick.
Samples from expressed, reconstituted or concentrated juice are measured after a simple user calibration with deionized or distilled water. Within seconds the instrument measures the refractive index of the sample and converts it to % by weight concentration units.

The MA872 digital refractometer eliminates the uncertainity associated with mechanical refractometers and is easily portable for measurements in the plant.
The measurement technique and temperature compensation employ methodology recommended in the ICUMSA Methods Book (Internationally recognized body for Sugar Analysis).
Temperature (in °C or °F) is displayed simultaneously with the measurement on the large dual level display along with icons for Low Power and other helpful message codes.

Key features include:
• Dual-level LCD
• Automatic Temperature Compensation (ATC)
• Easy setup and storage
• Battery operation with Low Power indicator (BEPS)
• Automatically turns off after 3 minutes of non-use.

MA872
SPECIFICATIONS
Range 0 to 85%
0 to 80°C / 32 to 175°F
Resolution

0.1%
0.1°C / 0.1°F

Accuracy ±0.2%
±0.3°C / ±0.5°F
Light Source Yellow LED
Measurements Time Approximately 1.5 seconds
Minimum Sample Volume 100 µL (cover prism totally)
Sample Cell SS ring and flint glass prism
Temperature Compensation Automatic between 10 and 40°C / 50 to 104°F
Case Material ABS
Enclosure Rating IP 65
Battery Type 1 x 9V AA (included)
Battery Life 5000 reading
Auto-shut off after 3 minutes of non-use
Dimensions 192 x 102 x 67 mm
Weight 420 g
Rp 5.500.000
Rp 4.900.000

IRON High Range Photometer Mi408

This user-friendly Colorimeter will give you direct readings in mg/L. Iron is naturally present in water supplies and its presence in both potable and industrial applications is regarded as objectionable.

Milwaukee offers Mi408 microprocessor-based instrument with greater resolution, better accuracy and immediate results for measuring high concentrations of Iron (from 0.00 to 5.00 mg/L).

MA886 Digital Refractometer Sodium Chloride

The MA886 is an optical instrument that employs the measurement of the refractive index to determine sodium chloride concentration in aqueous solutions used in food preparation.
It is not intended for sea water salinity measurements. The measurement of refractive index is simple and quick and provides the user an accepted method for NaCl analysis. Samples are measured after a simple user calibration with deionized or distilled water. Within seconds the instrument measures the refractive index of the solution. The digital refractometer eliminates the uncertainty associated with mechanical refractometers and is easily portable for measurements where you need them.

The instrument utilizes internationally recognized references for unit conversion and temperature compensation. It can display the measurement of NaCl concentration 4 different ways: g/100 g, g/100 mL, Specific Gravity, and °Baumé.
Temperature (in °C or °F) is displayed simultaneously with the measurement (on 3 of the ranges) on the large dual level display along with icons for Low Power and other helpful message codes.

Key features include:
• Automatic Temperature Compensation (ATC)
• Battery operation with Low Power indicator
• Automatically turns off after 3 minutes of non-use.

MA886
SPECIFICATIONS
Range

0 to 28 g/100 g
0 to 34 g/100 ml
1.000 to 1.216 Specific Gravity
0 to 26 ° Baumé
0 to 80°C / 32 to 175°F

Resolution

0.1 g/100 g
0.1 g/100 ml
0.001 Specific Gravity
0.1 ° Baumé
0.1°C / 0.1°F

Accuracy ±0.2 g/100 g
±0.2 g/100 ml
±0.002 Specific Gravity
±0.2 ° Baumé
±0.3°C / ±0.5°F
Light Source Yellow LED
Measurements Time Approximately 1.5 seconds
Minimum Sample Volume 100 µL (cover prism totally)
Sample Cell SS ring and flint glass prism
Temperature Compensation Automatic between 10 and 40°C / 50 to 104°F
Case Material ABS
Battery Type 1 x 9V AA (included)
Battery Life 5000 reading
Auto-shut off after 3 minutes of non-use
Dimensions 192 x 102 x 67 mm
Weight 420 g
Rp 5.500.000
Rp 4.900.000

Mi405 Ammonia MR Photometer

Mi405 Ammonia (Medium Range) Professional Photometer

This user-friendly Colorimeter will give you direct readings in mg/L.
Ammonia detection in water treatment systems is particularly important for aquarium owners and fish farm operators.

Ammonia is highly soluble in water and extremely toxic to fish. Fish farm owners must monitor and maintain careful control of ammonia levels to ensure optimum water conditions for their stock.

Milwaukee offers the Mi405 Photometer with a range of 0.00 to 9.99 mg/L, for medium concentrations.

Mi405
Glass Cuvets
Mi405 is supplied complete with 2 cuvets, reagents, hard carrying case, wiping tissue, 9V battery and instructions.
SPECIFICATIONS
Range 0.00 to 9.99 mg/l (NH3-N)
Resolution 0.01 mg/l
Accuracy ±0.10 mg/l @5.00 mg/l
Method adaptation of Nessler method
Sorgente luminosa Blue LED 466 nm
Light Detector silicon photocell and 466 nm narrow band interference filter
Environment 0 to 50°C / 32 to 122°F; max RH 100%
Battery Type 1 x 9V (included)
Auto-off after 10 minutes of non-use
Dimensions 192 x 104 x 52 mm
Weight 380 g

 

ACCESSORIES
Mi505-100 Ammonia MR reagent (100 tests)
Mi0001 Glass cuvets (2 pcs)
Mi0002 Caps for cuvets (2 pcs)
Mi0003 Stoppers for cuvets (2 pcs)
ORDERING INFORMATION
Mi405 is supplied complete with 2 cuvets, reagents for 100 tests, hard carrying case, wiping tissue, 9V battery and instructions.
Rp 200.000
Rp 180.000

PH meter 009

SPEC:
Range:0.0-14.0 PH
Resolution:0.1 PH
Accuracy: ±0.1 PH(at 20°C/ °F)
Typical EMC DEV: ±0.2 PH
Battery: 3x1.5V ( batere jam LR44 atau AG-13 )
Battery Life: approx 700 hours of use
Environment: 0°C-50°C
Relative Humidity: less than 95%
Ukuran: 15 x 3 x 2 cm
Trimming: by potentiometer

Rp 150.000
Rp 120.000

TDS Meter RRT

Keep one in your pocket! The HM TDS Meter is highly efficient and accurate due to its advanced microprocessor technology. Features an easy-to-read LCD screen, a hold function that saves measurements for convenient reading/ recording, a built-in thermometer and a carrying case with belt clip.

Specifications:
• Range: 0 – 9990 ppm (mg/L)
• Temp. Range: 0 – 80 degrees Celsius
• Resolution: 1 ppm, 1 degree Celsius
• Accuracy: +/- 2%
• Conversion Factor: NaCl (avg. 0.5)
• Automatic Temperature Compensation of 1 to 50˚C (33 to 122˚F)
• Power source: 2 x 1.5V button cell batteries (included)
• Battery life: 1000 hours of usage
• 3-year manufacturer’s warranty

Size: 6.1″ x 1.25″ x 1″

Grower’s Tip:
Total dissolved solids are the total amount of mobile charged ions, including minerals, salts or metals dissolved in a given volume of water, expressed in units of mg per unit volume of water (mg/L), also referred to as parts per million (ppm). It is directly related to the purity of water and the quality of water purification systems and affects everything that consumes, lives in, or uses water, whether organic or inorganic.

Rp 13.800.000
Rp 12.500.000

Turbidity Meter Mi415

Mi415 Turbidity Meter

Turbidity refers to the concentration of undissolved, suspended particles present in a liquid.

Turbidity is a measure of the clarity of a sample.
For potable water applications turbidity is a good indicator of water quality.
Turbidity Measurement is achieved by analyzing the amount of light refracted from suspended particles such as clay, silt and organic material.
By measuring turbidity, by photometric or tube methods, it is possible to estimate suspended solids content.

Mi415 has two operating ranges; 0.00 to 50.00 FNU, and 50 to 1000 FNU that can accommodate the most turbid condition you may encounter.

Mi415 is supplied in a hard carrying case, complete with reagents.

 

Mi415

Introduction to Turbidity

The cloudy appearance of water (called Turbidity) is caused by suspended material.
The unit of measure adopted by the ISO Standard is the FNU (Formazine Nephelometric
Unit) and by EPA is NTU (Nephelometric Turbidity Unit).
The other two methods used to test for turbidity and their measurement units are the JTU (Jackson Turbidity Unit) and the Silica unit (mg/L SiO2).
See the conversion table of these methods and their units for your reference.

 

 

Hard Carrying Case
The Turbidty Meter comes complete in hard carrying case, making it ideal for field measurements.
Glass Cuvets
The Turbidty Meter is supplied complete with 2 cuvets, reagents, hard carrying case, wiping tissue, 9V battery and instructions.
SPECIFICATIONS
Range
0.00 to 50.00 FNU; 50 to 1000 FNU
Resolution 0.01 FNU; 1 FNU
Accuracy ±0.5 FNU or ±5% of reading, whichever is greater
Method detection of scattered light
Light Source high emission infrared LED
Light Detector silicon photocell
Environment 0 to 50°C / 32 to 122°F; max RH 100%
Battery Type 1 x 9V
Auto-off after 5 minutes of non-use
Dimensions 192 x 104 x 52 mm
Weight 380 g

 

ACCESSORIES
Mi515-100 0 FNU calibration solution, 30 mL
10 FNU, calibration solution, 30 mL
500 FNU, calibration solution, 30 mL
Mi0001 Glass cuvets (2 pcs)
Mi0002 Caps for cuvets (2 pcs)
Mi0003 Stoppers for cuvets (2 pcs)
Mi0004 Tissue for wiping cuvets (4 pcs)
Mi0005 9V battery (1 pc)
ORDERING INFORMATION
Mi415 is supplied complete with 2 cuvets, reagents, hard carrying case, wiping tissue, 9V battery and instructions.

Handheld Ultrasonic Flowmeter TUF-2000H

[ Feature ]

High Accuracy measuring

Linearity: better than 0.5%, Repeatability: better than 0.2%, Accuracy: better than ±1%

Small size, Light weight

Dimensions: 200×93×33mm; Weight:390g

Non-intrusive measuring

Non-intrusive, clamp-on transducer, no pressure drop, no pipe disturbance.

Wide measuring range

Several types transducer for selection, measuring pipe size from DN15mm to DN6000mm

Large LCD display

Display instantaneous flow, accumulated flow (positive, negative and net), velocity, working status etc.

Built-in data logger

Built-in 24K data logger, store over 2000 lines measuring data 

[ Main Feature ]

Items

Performance and Parameter

Main Unit

Principle

transit-time ultrasonic flowmeter

Accuracy

Accuracy :over 1%-2%; Repeatability: over 0.2%

Display

4 line x 16 character LCD with backlight

Dimension

200*93*33cm:   390g

Operation

Support 16 key light touch keyboard and the Simulation keyboard software

Data interface

Insulate RS232 serial interface, upgrade the flew meter software by computer, 

support the MODBUS, etc. 

Signal Output

1 way OCT output

Special Cable

Twisted-pair cable, ;Select the RS232 communication.;

Generally, the standard is 5m*2, optional 10m*2 

Pipe Condition

Pipe Material

Steel, Stainless steel, Cast iron, Copper, Cement pipe, PVC, Aluminum, Glass

 steel product, liner is allowed.

Pipe Diameter

DN 15---6000mm

Straight length pipe

Transducer installation should be satisfied: upstream10D, downstream 5D, 

30D from the pump.

Measuring Medium

Type of Liquid

Water ; Ultra-pure liquids; Solvents and other liquids 

Temperature

Standard Transducer: -30--90℃; High-temperature transducer: -40--160℃

Turbidity

under 10000ppm and less bubble 

Flow rate

0--±10m/s

Flow Direction

Measuring two (plus-minis) direction of flow rate 

Working Environment

Temperature

Main Unit: -20--60℃

Flow transducer: -40--160℃;  

Temperature transducer: according to the customer’s demands.

Humidity

Main Unit: 85% RH

Power Supply

AC  110V-240V  

Rp 12.000.000
Rp 9.800.000

Ultrasonic Flowmeter TUF-2000SW

Features:

Working Environment

  Main Unit Transducer
Protection Level IP65 IP68
Humidity

≤85%RH

Temperature -20~60 -30~160

   

 

 

Basic Parameters

Accuracy

≤1%

Velocity range 0~±10m/s, Bi-directional measurement
Pipe size DN32~DN6000mm
Temperature -30~160
Type of liquid Single liquid can transmit ultrasound, such as water, sea water, sewage, oil, alcohol, etc.
Pipe material Steel, stainless steel, cast iron, copper, PVC, aluminmum, glass steel, etc. Liner is allowed.
Signal output

1 way 4-20mA output

1 way OCT pulse output

1 way Relay output

Signal input 3 way 4-20mA input, achieve to heat measurement by connecting PT100 platinum resistor.
Interface RS485, support MODBUS
Data storage SD card regularly store the pre-set results(optional)
Power supply DC8~36V or AC85~264V

Ultrasonic heat meter TUF-2000F

Working Environment

  Main Unit Transducer
Protection Level IP65 IP68
Temperature -20~60 -30~160

Basic Parameters

 

Accuracy

≤1%

Velocity range 0~±10m/s, Bi-directional measurement
Pipe size DN32~DN6000mm
Temperature -30~160
Type of liquid Single liquid can transmit ultrasound, such as water, sea water, sewage, oil, alcohol, etc.
Pipe material Steel, stainless steel, cast iron, copper, PVC, aluminmum, glass steel, etc. Liner is allowed.
Signal output

1 way 4-20mA output

1 way OCT pulse output

1 way Relay output

Signal input 3 way 4-20mA input, achieve to heat measurement by connecting PT100 platinum resistor.
Interface RS485, support MODBUS
Data storage SD card regularly store the pre-set results(optional)
Power supply

DC8~36V or AC10~30V

AC85~264V, waterproof power adapter.

Rp 12.000.000
Rp 10.000.000

Ultrasonic Flowmeter TUF-2000P

product

The current position : product display

Portable Ultrasonic Flowmeter

 
Model:TUF-2000P
 
 
  • Illustrations
  • Detailed Parameters

[ Feature ]

High Accuracy measuring

Linearity: better than 0.5%, Repeatability: better than 0.2%, Accuracy: better than ±1%

Non-intrusive measuring

Non-intrusive, clamp-on transducer, no pressure drop, no pipe disturbance.

Wide measuring range

Several types transducer for selection, measuring pipe size from DN15mm to DN6000mm

Chinese & English menu

Chinese & English display, easy to operate.

Built-in printer

Built-in mini thermal printer with instant and timing print function

Built-in data logger

Uplink over 20 measuring data to computer or SD card, convenient for the data processing and applications

Multi-signal input &output

Multiple signal interface easy for input and output signals

[ Main Feature ] 

Items

Specifications

Main unit

2 line x 20 character LCD with backlight

Working temperature: -25--60

Mini thermal printer with 24 line character output

4x4+2 pushbutton keypad

RS-485 interface for networking

Signal input & output

1 channel 4-20mA output

1channel OCT output

1channel relay output

3 channel 4-20mA input

Medium

Water (hot water, chilled water, city water, sea water, waste water, etc.);  

Sewage with small particle content; 

Oil (crude oil, lubricating oil, diesel oil, fuel oil, etc.);  Chemicals (alcohol, acids, etc.); 

Plant effluent; Beverage, 

liquid food; Ultra-pure liquids; Solvents and other liquids

Flow rate Range

0~±10m/s

Accuracy

Better than ±1%

Battery

Built-in rechargeable Ni-MH rechargeable battery, provide over 20 hours of continuous operation 

Power Consumption

1.5W

Power supply

Built-in rechargeable Ni-MH battery (for 20 hours operation) or AC 220V

Weight & Dimensions

2.5kg ;  225*180*67mm: 

Remarks

With a high strength carrying case suitable for normal and harsh environment

Rp 870.000
Rp 750.000

BOGOROV CHAMBER

Bogorov Chamber ini adalah peralatan untuk menghitungjumlah
zooplankton mikro krustasea & benthos. Pada volume sampel yang cukup
besar yakni 6 ml.
Terbuat dari bahan Plexiglass dengan ketebalan 10 mm.Bentuk dan
konfigurasi, terukir alur lebar 5 ml dan panjang keseluruhan 350 mm.
Alat ini memiliki ukuran 3,5 "x 4,5" , sehingga sesuai untuk diletakkan di
bawah mikroskope.
Kemasan : Berisi 1 buah Bogorov Chamber Kapasitas 6 ml, dan 2 buah
Pipet 3 ml

Rp 4.000.000
Rp 3.600.000

Grab Sampler 250ml

Alat ini cocok digunakan untuk berbagai keperluan seperti ; air limbah (baik di sungai maupun pada
kolam limbah), danau, tangki (air atau minyak), lubang sumur pantau (khusus model : APAL-GW01),
lubang saluran air dan tempat-tempat yang sulit dijangkau lainnya.
Alat  pengambil  contoh  air  ini  terdiri  dari  botol  gelas  (Borosilicate)  dan  stainless  steel  yang  ujung
atasnya  dapat  di  buka  tutup  dan  terikat  tali  keatas sedangkan  ujung  bawah  tertutup  dan  dilengkapi
pemberat di bawah.
Metode ini sesuai dengan SNI 6989.58:2008
Bahan    : Stainless steel
Botol Penampung  : Borosilicate Glass
Botol Kapasitas  : (APAL-GW01) 250 ml ; Tinggi : 300 mm, Diameter : 92 mm
   : (APAL-GW02) 1000 ml ; Tinggi : 400 mm, Diameter : 140 mm
Tali Utama   : PE 5 mm Panjang 20 meter (putih)
Tali Kedua   : PE 3 mm Panjang 20 meter (merah)
Material   : semua material terbuat dari bahan anti karat Stainless Steel dan Teflon
Botol Penampungan  : Dapat disterilisasi dengan Autoclave, sehingga dapat digunakan
untuk tujuan sampling Bacterial

Rp 1.200.000
Rp 1.000.000

Ovitrap Mosquito Trap

Ovitrap adalah perangkat terdiri dari sebuah bejanaair yang dilengkapi tabung dengan screen untuk
mencegah anakan nyamuk keluar, berfungsi sebagai perangkap larva nyamuk dan anakan nyamuk
Perangkat  ini  digunakan  untuk  mengontrol  populasi  nyamuk  Aedes  dan  nyamuk  lainnya.  Hal  ini
dapat  memantau,  mengendalikan  dan  mendeteksi  populasi  nyamuk  Aedes  sehingga  bertindak
sebagai sinyal peringatan dini untuk mendahului wabah demam berdarah yang akan datang.
Prinsip  kerja ovitrap Telah  banyak  digunakan  di  negara-negara  seperti  Singapura,  Amerika  Serikat,
dan Hong Kong sejak tahun 1970-an
Ukuran : diameter 184 mm x 122 mm, Kapasitas : 2.2 lt
Ideal digunakan di ;
Sekolah,  Pusat  pengendalian  dan  pencegahan  penyakit,  rumah  sakit,  bangunan  komersial,  kamar
mandi, dapur basah, taman, kolam renang situs dan lain-lain.
PRINSIP KERJA
Ovitrap  ketika  ditambahkan  dengan  air  akan  menarik  nyamuk  betina  untuk  bertelur.  Ketika  telur
menetas dan berkembang menjadi dewasa, mereka tidakdapat terbang keluar dari perangkat dan
mati  dalam  perangkap.  Ekstensif  menggunakan  ovitrap dalam  sebuah  komunitas  dapat  digunakan
dalam pengendalian populasi Aedes dan efektif mengurangi populasi nyamuk Aedes di daerah itu.
REKOMENDASI
Untuk mendapatkan hasil yang maksimal dapat ditambahkan cuka buah / ragi dan sedikit gula.
PERAWATAN
Setelah larvae nyamuk dan serangga yang terperangkap telah cukup padat, sesekali perlu
dibersihkan untuk ovitrap, setidaknya dua minggu sekali.
Gunakan air untuk mencuci, kemudian simpani tempat yang kering. 

Rp 1.500.000
Rp 1.100.000

Tabung Pengukur Kekeruhan

Tabung Pengukur Kekeruhan juga dapat digunakan untuk mengukur kekeruhan air pada Sumursumur yang biasa digunakan masyarakat.
Spesifikasi alat ;
▪ Bahan Tabung  : Transparan Acrylic
▪ Secchi disc  : Plastic Teflon dengan pemberat
▪ Dia secchi disc  : 4,5 cm
▪ Ukuran Tabung  : 70 cm (Long) x 5 cm (Dia)
Cara penggunaan
•  Masukkan air sampel yang akan di ukur ke dalam tabung sampai hampir penuh atau +/- 5 cm
mendekati bibir atas tabung
•  Selama tabung berisi air pegang dengan kuat dan tegak lurus agar tabung tidak jatuh
•  Diamkan dulu air yang ada di dalam tabung kurang lebih 5 menit, untuk pengkondisian.
•  Tarik meteran sampai memanjang 1 meter lalu masukkan secchi disc ke dalam tabung

Rp 1.500.000
Rp 1.300.000

Vektor  Kit  adalah  serangkaian  alat  untuk  pemantauan dan  identifikasi  jentik  nyamuk  dan
nyamuk dewasa sebagai bagian dari pencegahan dini terhadap penyakit menular bersumber
dari vektor nyamuk.
Alat ini terdiri dari ;
1.  Aspirator 1 buah
2.  Cup include screen 10 buah
3.  Dipper 500 ml 1 buah
4.  Senter LED with Battery charge 1 buah
5.  Botol Larvae 10 buah
6.  Lensa Loupe with LED 1 buah
7.  Ovitrap 2 buah

Rp 8.000.000
Rp 7.200.000

Conductivity Hamilton 15µS/cm

Specifications

Accuracy ± 1 %
Value at 25 °C 15 µS/cm
Stability (Months) 36
Certificate DFM
Package 300 ml glass bottle

Rp 8.700.000
Rp 8.000.000

Conductivity Hamilton 5µS/cm

Specifications

Accuracy ± 1 %
Value at 25 °C 5 µS/cm
Stability (Months) 36
Certificate DFM
Package 300 ml glass bottle

Rp 7.000.000
Rp 6.450.000

Hamilton Conductivity 84µS/cm

Specifications

Accuracy ± 1 %
Value at 25 °C 84 µS/cm
Stability (Months) 18
Certificate DFM
Package 500 ml Calpack bottle
Rp 920.000
Rp 740.000

Thermometer GoldBrand 100C

Overall length (mm) : 300
Subdivision °C : 1
Range from/ to°C : -10-110
Calibrated for total immersion. Stem Ø 6-7 mm, yellow coated, top endround.
Black graduation and inscriptions. Measuring capillary with oval cross section for
improved readability. Mercury filled. Pack of 1

Rp 1.200.000
Rp 850.000

Thermometer GoldBrand 150C

Overall length (mm) : 300
Subdivision °C : 1
Range from/ to°C : -10-110
Calibrated for total immersion. Stem Ø 6-7 mm, yellow coated, top endround.
Black graduation and inscriptions. Measuring capillary with oval cross section for
improved readability. Mercury filled. Pack of 1

Rp 980.000
Rp 750.000

Thermometer GoldBrand 50C

Overall length (mm) : 250
Subdivision °C : 0.5
Range from/ to°C : 0-50
Calibrated for total immersion. Stem Ø 6-7 mm, yellow coated, top endround.
Black graduation and inscriptions. Measuring capillary with oval cross section for
improved readability. Mercury filled. Pack of 1

Rp 300.000
Rp 200.000

Thermometer 110C Brand

Tersedia berbagai macam Ukuran
Bahan Gelas,warna kuning dengan isi adalah mercury
Negara Pembuat adalah german
Merek Brand

Rp 330.000
Rp 250.000

Thermometer 200C Brand

Tersedia berbagai macam Ukuran
Bahan Gelas,warna kuning dengan isi adalah mercury
Negara Pembuat adalah german
Merek Brand

Rp 350.000
Rp 270.000

Thermometer 250C Brand

Tersedia berbagai macam Ukuran
Bahan Gelas,warna kuning dengan isi adalah mercury
Negara Pembuat adalah german
Merek Brand

Rp 18.000.000
Rp 13.500.000

Salt Meter TM-30D

Easy to use, just set the knob to the measurement position. Bright, easy-to-read large LCD display with AC adapter

Measurement range 0-30% (more than 3% dilution measurement)
Accuracy 0 ~ 3% less than: ± 0.05%
± 0.05% ~ 3% ± 0.5%
Resolution 0.01%
± 0.05% ~ 3% ± 0.5%
Calibration point Manually 1 point (3%)
Measured temperature 0 ~ 50 ℃
Temperature correction Automatic
Minimum amount of sample 40ml
Power AC100V household power outlet or battery 9V (006P)
Size and weight Body of 170 × 110 × 65 (mm) · 450g

*accessories for creating salt calibration solution (min 500cc)
standard solution (3%) measuring vessel AC Adapter Carrying Case

Rp 2.900.000
Rp 2.250.000

Salt Meter YK-31SA

SALT METER
Model : YK-31SA
* Measurement : 0 ot 10.0% salt (% weight).
* Large LCD display, 21.5 mm digit height.
* Automatic temperature compensation.
* Data hold, professional housing case.
* Aquariums, Water conditioning laboratory, industry & quality control.

Rp 200.000
Rp 180.000

PH meter Pen

SPEC:
Range:0.0-14.0 PH
Resolution:0.1 PH
Accuracy: ±0.1 PH(at 20°C/ °F)
Typical EMC DEV: ±0.2 PH
Battery: 3x1.5V ( batere jam LR44 atau AG-13 )
Battery Life: approx 700 hours of use
Environment: 0°C-50°C
Relative Humidity: less than 95%
Ukuran: 15 x 3 x 2 cm
Trimming: by potentiometer

Rp 750.000
Rp 500.000

Refracto Brix 0-32%

    Measuring Range:
    0~ 32% Brix Scale
    1.000 ~ 1.130 Wort Specific Gravity
    Accuracy:±0.2% Brix  ±0.001 Wort Specific Gravity
    Scale Divisions:
    0.2% Brix
    0.001 Wort Specific Gravity
    Automatic Temperature Compensation (ATC): 10°C~30°C (50°F~86°F)
    Dual Scale: Brix Scale and Specific Gravity Scale
    Full range 0 to 32% Brix scale with 0.2% scale division
    1.000 ~ 1.130 specific gravity scale for unfermented wort
    Determines the amount of dissolved salt and dissolved solids
    Approved by strict quality and safety standards
    Durable and built to last long
    Heavy-duty and lightweight with its aluminum construction
    Easy to focus and calibrate
    Accurate testing results guaranteed
    Made with the highest and finest quality of aluminum & rubber that makes it lightweight
    Cushioned with soft & comfortable non-slip rubber
    Extremely easy-to-use and calibrate

Rp 750.000
Rp 500.000

Refracto Garam

Deskripsi Produk

Bisa digunakan untuk tambak atau aquarium dalam pemeliharaan ikan.
Spesifikasi:
Ukuran : 195 x 40mm
Range pengukuran : 0-100%(0-10%) sehingga dapat dikatakan kalau di refrakto hasilnya 40% berarti mengandung kadar garam sesungguhnya 4%
Accuracy: 0.001sg(1%)
Salinity Proportion: 1.000-1.070sg

Penggunaan pengukuran kadar garam berdasarkan pada spesifik gravity air laut.
Feature:
Sturdy and light weighted Aluminum body.
Superior quality rubber grip.
High quality and accurate testing result.
Can be easily calibrated with a mini-screw driver.
Automatic temperature compensation (ATC)
Easy to use, convenient to carry.